Loading ...
Loading ...
Loading ...
Thermocouple
The thermocouple is very crucial for cutting gas supply in case of flame out during cooking, be sure to
keep them in very clean condition.
Leak testing of the appliance shall be conducted according to the manufacturer’s instructions.
Maintenance instructions suggesting (We suggest to clean it every six months.):
1) Keeping appliance area clear and free from combustible materials, gasoline, and other
flammable vapors and liquids.
2) Not obstructing the flow of combustion and ventilation air.
3) Visually checking pilot(s) and burner flames, with pictorial representation.
A>Remove the utensil supports.
B>Light burners.
C>Turn knobs from MAX to MIN, Check the flame status, the flame in MIN position should be smaller
than in MAX position, as figure shown below.
D>Always check flame before each use, see TROUBLESHOOTING if any abnormal status found.
Trouble Shooting
Problem
Corrective action
• There is no spark when lighting the gas
• Check that the unit is plugged in and the electrical
supply is switched on
• Check that the RCCB has not tripped (if fitted)
• Check the mains fuse has not blown
• Check the burner cap and crown have been replaced
correctly, e.g. after cleaning.
• The gas ring burns unevenly
• Check the main jet is not blocked and the burner crown
is clear of food particles.
• Check the burner cap and crown have been replaced
correctly, e.g. after cleaning.
Instructions for the Installer
Overall dimensions
For Model
Width
Depth
EMPV-30GC20 EMPV-30GC21 EMPV-30GC26
29.90in
20.08in
EMPV-36GC22 EMPV-36GC23 EMPV-36GC24
EMPV-36GC25
36.02in
20.67in
EMPV-36GC27
35.43in
20.67in
EMPV-24GC28
23.23in
20.08in
10
Loading ...
Loading ...
Loading ...