Loading ...
Loading ...
Loading ...
Searching for Stations In Manual Mode
Pushing
or for more than two seconds displays
the selected radio station frequency. Each time a
button is pushed, the radio station frequency is in-
creased or decreased according to the default search
pattern for the selected band (100 kHz for FM and 10k
Hz for AM). When the search button is pushed and
held, the radio station frequency will continue to be
increased or decreased. If the buttons are not pushed
for five seconds, the display will show the message
⬙AUTO⬙ and manual search mode will be canceled.
When the search is complete, the display will show the
tuned band and station in the format ⬙F1 106.9⬙,or,if
the station found was previously stored in memory,
the display will show the channel where it is stored
and the tuned station.
Mute/Pause
Pushing this button mutes the sound. The display will
switch between ⬙MUTE ON⬙ and the previous display (3
seconds).
Pushing the button again restores the audio without
changing the original volume setting. The display will
show ⬙MUTE OFF⬙ for three seconds, and then return to
the previous display mode.
When the
or , Audio, 1, 2, 3, 4, 5, 6, BAND/AS
buttons and SRC are pushed in ⬙Mute/Paused⬙ mode,
these will be implemented and the audio will be
restored without changing the original volume.
Turn the ROTARY knob to restore the audio and change
the volume to the level selected. The display will show
the settings described in the volume function.
The other buttons should be implemented when pushed,
but the radio will remain in ⬙MUTE ON⬙ mode.
186 UNDERSTANDING YOUR INSTRUMENT PANEL
Loading ...
Loading ...
Loading ...