Loading ...
Loading ...
Loading ...
Installation
English 23
A
A. Bracket-Stacking
4. Install bracket to dryer.
• Remove washer top cap screw from
the rear left. Align left bracket holes
with top cap screw hole on rear left
of the unit and replace screw.
• Repeat the above step with the
right side.
NOTE
Leave screw loose so dryer hole alignment
will be easier.
B
B. Screw
5. Install dryer and bracket on washer
WARNING
• Lift the dryer on top of the washer.
Protect the washer control panel with
cardboard or other protection. Be sure
to lift the dryer high enough to clear
the washer control panel.
Personal Injury. More than two people
are recommended to lift the dryer into
position because of its weight and size.
Failure to do so could result in injury.
• Align the holes in the bracket with the
holes in the back of the dryer. Using
a Phillips screwdriver, attach the
M4 x 12 tapping screws.
• Tighten the washer bracket screws ;
then tighten all stacking kit screws.
DV6000K_DC68-03709C-03_EN.indd 23 2018-11-09 12:34:30
Loading ...
Loading ...
Loading ...