Loading ...
Loading ...
Loading ...
Installation
Installation
English18
A B
NOTE
• To set the dryer to the same height
as the washer, fully retract (A)
the levelling feet by turning them
counterclockwise, then loosen (B) the
legs by turning them clockwise.
• Adjust the levelling feet only as
much as necessary to level the dryer.
Extending the levelling feet more
than necessary can cause the dryer to
vibrate.
4. Review "Electrical requirements" section (See page 16).
Before operating or testing.
5. With a level, check your dryer and make necessary adjustments to the levelling legs.
6. Plug in your dryer, and check operation by using the checklist below.
Final installation checklist
• Dryer is plugged into electrical outlet and is properly grounded.
• Dryer is leveled and is sitting rmly on the oor.
• Start your dryer to conrm that it runs, heats, and shuts off.
• Finally, check if the "HC" check occurs when after running the TIME DRY cycle for
20 minutes.
Draining water without using the water tank
You can use the dryer without using the water tank by following the procedures below.
Install the drain hose so that water can be drained well.
• Otherwise, the water may overow and it may cause damage to the properties.
DV6000K_DC68-03709C-03_EN.indd 18 2018-11-09 12:34:28
Loading ...
Loading ...
Loading ...