Loading ...
Loading ...
Loading ...
16 17
a
Remove power cords and small objects from the floor that may entangle RoboVac.
You can use the supplied cable ties to organize your wires and power cords.
b
Fold tasseled edges of area rugs underneath to prevent tangling RoboVac. Avoid
cleaning very dark-colored high-pile rugs or rugs thicker than 1.02 in/26 mm as
they may cause RoboVac to malfunction.
c
Keep RoboVac away from spaces lower than 2.87 in/73 mm to prevent RoboVac
from getting stuck. If necessary, place a physical barrier to block off the problem
areas.
d
Keep RoboVac away from wet areas.
e
RoboVac may climb on top of objects less than 0.63 in/16 mm in height. Remove
these objects if possible.
f
Anti-drop sensors can prevent RoboVac from tumbling down stairs and steep
drops in most cases. They may work less effectively if dirty or used on carpeted/
reflective/very dark-colored floors. It is recommended to place physical barriers to
block off areas where RoboVac may fall.
Place physical barriers in front of fireplaces and areas that may cause damage to
RoboVac if entered.
Preparation
Install the side brushes before use.
Turn on the main power switch on the bottom of RoboVac.
Remove the sticker next to the power switch, and the foam blocks beside the
bumper before use.
Place the Charging Base on a level surface and against a wall.
Loading ...
Loading ...
Loading ...