Loading ...
Loading ...
Loading ...
15Instruction Manual
8.5 Cleaning the Inlet Filter
You should clean the inlet filter periodically, or if you find that insufficient water is being
supplied to your washing machine when the supply tap is open.
To clean the inlet filter:
— Close the water supply tap.
— Select any wash programme (except for Spin Only or Drain Only) and press the Start/
Pause button. Allow the programme to run for about 40 seconds.
— Remove the inlet pipe from the closed tap and use water to wash the filter.
— Reconnect the inlet pipe to the tap.
To clean the washing mashine filter:
— Screw off the inlet pipe from the rear of the washing machine.
— Pull out the filter with long nose pliers, wash it thoroughly with water and re-install the
filter.
— Reconnect the inlet pipe to the rear of the washing machine.
— Open the water supply at the tap and ensure there is no water leakage.
— Once finished, close the water supply tap.
Note:
Generally the tap inlet filter is washed first followed by the washing machine filter. If only
the washing machine filter is washed, then you should still follow steps 1-3 for cleaning
the inlet filter first.
8.5 Removing Foreign Objects
Warning! To avoid the risk of an electric shock, always remove the power plug from the
power outlet before cleaning the Drain Pump filter.
Periodically you should clean the drain pump filter to ensure normal operation of your
washing machine. The type of washing, frequency and soil level of your washing cycles
will alter how often this procedure needs to be undertaken, however you should insept the
filter regularly.
Should your washing machine not empty and/or spin, or your machine makes unusual
noises during operation, your Drain Pump filter could be blocked. Follow this procedure to
check or remove any foreign objects.
— After disconnecting the power, open the filter cover at the front base of your washing
machine.
— Unscrew the filter in an anti-clockwise direction and remove any foreign objects.
— Re-install the filter and close the service panel.
Warning! Never remove the pump cover when the washing machine is in operation,
always wait until the appliance has finished and the is empty. There can be hot
water within the pump, so be careful to avoid burns, should it have operated
recently. When replacing the cover, be careful to ensure it is closed securely..
Loading ...
Loading ...
Loading ...