Loading ...
Loading ...
Loading ...
www.oster.com
www.oster.com
10
11
Care & Cleaning
HOW TO CLEAN YOUR FONDUE POT
WARNING: ALWAYS TURN PROBE CONTROL TO OFF
THEN DISCONNECT PLUG FROM WALL OUTLET BEFORE
DISCONNECTING THE CORD.
Your Titanium Infused DuraCeramic™ Fondue Pot should
be cleaned after every use.
1. Unplug the fondue and allow it to cool before cleaning.
NOTE: To protect the Titanium Infused DuraCeramic™
coating, do not run cold water over cooking surface
immediately after use.
2. Remove the temperature control probe. DO NOT
IMMERSE TEMPERATURE CONTROL PROBE or FONDUE
IN LIQUIDS.
3. Wipe down the cooking surface with a damp cloth and
dry thoroughly. DO NOT use steel wool or other metal
pads as this may scratch the surface.
4. The fondue is NOT dishwasher safe. You may wash it
with hot soapy water, rinse and dry thoroughly.
CAUTION: TEMPERATURE CONTROL PROBE must always
be completely dry before use.
For proper care of your Titanium Infused DuraCeramic™
coated fondue, follow the following steps if suborn stains
appear:
1. Sprinkle some baking soda on the stained area.
2. Add enough water to moisten the baking soda, making
a paste like texture.
3. Let sit for a few minutes (for tougher stains let sit up to
an hour).
4. Lightly scrub with a plastic scouring pad or damp cloth
and dry thoroughly.
5. Repeat if necessary.
Should any stubborn stains appear, they will not aect the
performance and non-stick quality of the Titanium Infused
DuraCeramic™ coating.
STORAGE AND MAINTENANCE
• Unplug cord and remove temperature controller. Allow
appliance to cool before storing. Store your Electric
Fondue Pot in a dry location, such as on a tabletop or
countertop, or on a cupboard shelf. Wind the electrical
cord into a coil and secure with a twist fastener. For
convenience, the temperature controller and cord can
then be stored inside the fondue pot.
Other than recommended cleaning, no further user
maintenance is necessary.
ADDITIONAL MAGNETIC CORD WARNINGS
• Do not attempt to defeat the detachable magnetic
cord system by trying to permanently attach cord set to
product.
• Do not stick pins or other sharp objects in holes on
magnetic cord set.
• Do not use any type of steel wool to clean magnetic
contacts.
FPSTFN7700-TECO_16ESM1.indd 10-11 6/14/16 09:08
Loading ...
Loading ...
Loading ...