Loading ...
Loading ...
Loading ...
26
WARNING
Make sure that the washer dryer has been shut
o and disconnected from its electrical power
supply before cleaning the water lter or draining
the residual water.If a high temperature wash
programme has recently been used, wait for the
water to cool before draining it.
The water lter should be cleaned regularly in
order to prevent water from remaining inside
the appliance after wash cycles due to lter
obstructions.
CLEANING THE WATER FILTER /
DRAINING THE RESIDUAL WATER
1. Remove the kick panel: Using a screwdriver,
do that which is shown in the following gure.
2. Container for the drained water:
Place a low and wide container under the water
lter in order to collect the residual water.
3. Drain the water:
Slowly turn the lter counter-clockwise until all the
water has come out. Allow the water to ow out
without removing the lter.
Once the container is full, close the water lter by
turning it clockwise. Empty the container. Repeat
the procedure until all the water has been drained.
4. Remove the lter: Place a cotton cloth under
the water lter in order to absorb any small
amounts of residual water. Next, remove the water
lter by turning it counter-clockwise.
Loading ...
Loading ...
Loading ...