Loading ...
Loading ...
Loading ...
Problems
Solutions
Robot does not work.
• Ensure the Main Power Switch on the bottom is in the “ON” position and the
battery level is not too low.
• Ensure the batteries (2 AAA) in the Remote Control is OK.
• Ensure
aim the Remote Control directly at the Robot within 5m when pressing.
• If Robot still does not work, reset it by turning off and then turning on the swicth
on the bottom of Robot.
Remote Control failure.
• Ensure the batteries are installed correctly.
• Replace with new batteries in the Remote Control .
• Ensure the Main Power Switch on the bottom of Robot is turned on and Robot
is fully charged.
• Use a dry cloth to wipe the Infrared Emitter on the Remote Control and the Infrared
Receiver on Robot.
Robot gets stuck.
• Pick up objects like clothing, loose paper, pull cords, and fragile objects to
avoid Robot stuck before it starts working.
• Robot’s slimmer body would work with most of the furniture but it still probably
stuck. Notice: the lowest height is 2.7”.
• Robot
is not suitable for use on long-pile carpet. Before using A800 near an area
rug or on a prevent on a short-pile area rug with tasseled edges, please fold
area rug’s edges under themselves to prevent A800 from tangling.
You can not schedule cleaning.
• Ensure the Main Power Switch on the bottom of Robot is turned on.
• Ensure
aim the Remote Control directly at the Robot within 5m when pressing.
• Ensure the time, time of day (AM/PM), and the scheduled time have been
set correctly (local time).
• Check if A800’s power is too low to start cleaning.
Suction power is weak.
• Check if the suction inlet is blocked by obstructions or not.
• Empty the Dust Bin.
• Clean the f
ilters with a vacuum cleaner or a cleaning brush, and air-dry the
filters completely before use if the filters are wet.
You can not cancle schedule cleaning.
• Robot only allows for one schedule cleaning per day, and it will clean at the
same time everyday until you turn off the main power switch or cancel the
schedule cleaning by Remote Control. You can press the button for 5S to cancel
the schedule cleaning. Robot will BEEP TWICE to indicate the schedule has been
cancelled.
16
Loading ...