Loading ...
Loading ...
Loading ...
English32
Operations
Control panel
01
02
03 04 05 06 07
08
09
11
10
01 Cycle Selector Turn the dial to select a cycle.
02 Display
The display shows current cycle information and estimated time
remaining, or an information code when a problem occurs.
03 Temp.
Press to change the water temperature for the current cycle.
04 Rinse
Press to change the rinse count for the current cycle. You can set
the rinse count to a max of 5, depending on the cycle.
05 Spin
Press to change the spinning speed for the current cycle. The
revolutions per minute (RPM) differs with the model.
• Rinse Hold : The nal rinse process is suspended so that the
laundry remains in the water. To unload the laundry, run a
drain or spin process.
- To use the Rinse Hold option, press Spin repeatedly
until all the Spin option indicators turn off.
• No Spin : The drum does not rotate after the nal drain
process.
- To use the No Spin option, press Spin repeatedly until
the option indicator ( ) turns on.
• Spin Only : To run the Spin Only cycle, press Spin for
3 seconds. When the cycle time and spinning speed appear,
press Spin repeatedly until a desired spinning speed
is selected. Then, press Start/Pause to start the cycle. The
spinning time depends on the selected cycle.
06 Options
Press to select an option from Intensive, and Pre Wash. Press
again to deselect.
• Availability of the options depends on the cycle.
Operations
Untitled-3 32 2018-01-26 12:27:44
Loading ...
Loading ...
Loading ...