Loading ...
Loading ...
Loading ...
Installation
English20
Installation
C
3. Hold the adaptor and turn part (C) in
the arrow direction to loosen it by
5 mm (*).
C
4. Insert the adaptor into the water tap,
and tighten the screws while lifting up
the adaptor.
5. Turn part (C) in the arrow direction to
tighten it.
D
6. While holding down part (D), connect
the water hose to the adaptor. Then,
release part (D). The hose ts into the
adaptor with a clicking sound.
7. If you are using a screw type of water
tap, use the provided screw-type
adaptor to connect to the water tap as
shown.
Untitled-3 20 2018-01-26 12:27:35
Loading ...
Loading ...
Loading ...