Loading ...
Loading ...
Loading ...
6
COOKTOP USE
Electric igniters automatically light the surface burners when
control knobs are turned to (Ignite).
Before setting a control knob, place lled cookware on the
grate. Donot operate a burner using empty cookware or
withoutcookware on the grate.
To Set:
1. Push in and turn knob counterclockwise to the Ignite position.
IMPORTANT: All four surface burners will click. Only the
burner
with the control knob turned to the Ignite position will
produce a ame.
2. Turn knob to anywhere between Hi and Lo.
Power Failure
In case of prolonged power failure, the surface burners can
be lit manually. Hold a lit match near a burner and turn knob
counterclockwise to the Ignite position. After the burner lights,
turn knob to setting.
Sealed Surface Burners
IMPORTANT: Do not obstruct the ow of combustion and
ventilation air around the burner grate edges.
Burner cap: Always keep the burner cap in place when using
asurface burner. A clean burner cap will help avoid poor ignition
anduneven ames. Always clean the burner cap after a spillover
and routinely remove and clean the caps according to the
“General Cleaning” section.
Gas tube opening: Gas must ow freely throughout the gas tube
opening for the burner to light properly. Keep this area free of soil
and do not allow spills, food, cleaning agents, or any other
material to enter the gas tube opening. Keep spillovers out of
thegas tube by always using a burner cap.
Burner ports: Check burner ames occasionally for proper size
and shape as shown in the previous illustration. A good ame
is blue in color, not yellow. Keep this area free of soil and do not
allow spills, food, cleaning agents, or any other material to enter
the burner ports.
WARNING
Fire Hazard
Do not let the burner flame extend beyond the edge of
the pan.
Turn off all controls when not cooking.
Failure to follow these instructions can result in death
or fire.
REMEMBER: When range is in use or (on some models)
during the Self-Cleaning cycle, the entire cooktop area may
become hot.
A
B
D
E
C
A. Burner cap
B. Burner base
C. Alignment pins
D. Igniter
E. Gas tube opening
B
A
A. 1-1
1
/
2
" (2.5-3.8 cm)
B. Burner ports
Keypad Feature Instructions
CLEAN Self-Cleaning
cycle
See the “Self-Cleaning Cycle” section.
CONTROL LOCK
(Hold 3 sec)
Oven and
cooktop control
lockout
1. Check that the oven and cooktop are off.
2. Press and hold CONTROL LOCK for 3 seconds.
3. A tone will sound and a lock will be displayed.
4. Repeat to unlock. No keypads will function with the controls locked.
Loading ...
Loading ...
Loading ...