Loading ...
Loading ...
Loading ...
35
5 Maintenance
5 Maintenance
Your Z6 has the following integrated maintenance programmes:
U
Rinsing the machine
U
Rinsing the milk system in the dual spout
U
Cleaning the milk system in the dual spout (‘Clean the milk
system’
)
U
Changing the filter (‘Change the filter’) (only if filter is acti-
vated)
U
Cleaning the machine (‘Clean’)
U
Descaling the machine (‘Descale’) (only if filter is not acti-
vated)
E Clean or descale the machine, rinse the milk system or change
the filter when you are prompted to do so.
E In the interests of hygiene, you should clean the milk system
daily when you have been preparing milk.
You can initiate the rinse operation manually at any time.
Precondition:
‘Please select product’ is displayed.
T Place a receptacle under the dual spout.
T Press the Rotary Switch.
‘Maintenance status’
T Press the Rotary Switch.
‘Clean’
T Turn the Rotary Switch until ‘Rinse’ is displayed.
T Press the Rotary Switch to initiate the rinse operation.
‘Machine is rinsing’, ‘Milk system is being rinsed’, water
flows out of the dual spout.
The rinse stops automatically.
‘Please select product’
appears on the display.
15 minutes after milk preparation, the milk system is automatically
rinsed. Therefore always place a receptacle under the dual spout
after preparing milk.
15 minutes after milk preparation,
‘Milk system is being rinsed’
appears, water flows out of the dual spout. The rinse stops automat-
ically. Your Z6 is once more ready for use.
Rinsing the machine
Automatic milk system
rinsing
Loading ...
Loading ...
Loading ...