Loading ...
Loading ...
Loading ...
28
4 Permanent settings in programming mode
T Press the ‘Save’ button.
‘Saved’ appears briefly on the display.
The new product name is displayed.
T Press the
‘ button the number of times needed to display
the start screen again.
You can choose from ten levels for the milk and milk foam tempera-
ture. This setting applies to all products for which milk is used.
Example:Proceed as follows to change the milk foam temperature.
Precondition:
‘Please select product’ is displayed.
T Press the Rotary Switch.
‘Maintenance status’
T Turn the Rotary Switch until ‘Product settings’ is displayed.
T Press the Rotary Switch.
‘Expert mode’
T Turn the Rotary Switch until ‘Milk temperature’ is displayed.
T Press the Rotary Switch to enter the programme item.
‘Milk’
T Turn the Rotary Switch until ‘Milk foam’ is displayed.
T Press the Rotary Switch.
‘Milk foam’
T Turn the Rotary Switch to change the setting.
E You can change the temperature from level 1 (low) to level 10
(high).
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘Milk foam’
T Press the ‘ button the number of times needed to display
the start screen again.
By instructing your Z6 to automatically switch itself off, you can cut
down your energy consumption. If this function is activated, your Z6
switches off automatically after the preset time following the last
action on the machine.
You can set the automatic switch-off to 15 minutes, 30 minutes
or 1–9hours.
Setting milk and milk
foam temperature
Automatic switch-off
Loading ...
Loading ...
Loading ...