User Manual Maytag WFW6620HC Washing Machine

Documents for Maytag WFW6620HC

The following documents are available:
User Manual Energy Guide Specification
  • Specification Sheet - (English) Download
Other Documents
  • Energy Star Certification - (English) Download
Warranty Installation Instruction
  • Installation Instructions - (English) Download
Photos
WFW6620HC photo
W11340167A
W11340168A - SP
®
/
©2019 Whirlpool. All rights reserved. Used under license in Canada.
02/19
Quick Reference Guide
NOTE: See your Use and Care Guide for more information.
Not all settings and options are available on all cycles.
Fire Hazard
Never place items in the washer that
are dampened with gasoline or other
flammable fluids.
No washer can completely remove oil.
Do not dry anything that has ever had any
type of oil on it (including cooking oils).
Doing so can result in death, explosion,
or fire.
Using Your Front-Loading Washer
Start/Pause
Button
Power
Button
How to
Wash
What to
Wash
ADD LAUNDRY PRODUCTS,
IF DESIRED
Before washing clothes for the rst time,
choose the Regular/Quick cycle and run it
without clothes. This initial cycle serves to
ensure the interior is clean before washing
clothes.
3
RUN WASH CYCLE WITHOUT
LAUNDRY
Your washer comes equipped with either a
1-Liter or 2-Liter Load & Go
bulk dispenser,
which allows you to ll with detergent once
and skip rells for multiple loads.
Use HE detergent only.
To Fill Bulk Dispeners:
Open the dispenser
drawer, gently pull up on
the dispenser lid tab, and
ll to the “MAX” line.
IMPORTANT: Do not
use chlorine bleach or
powdered detergent in the
bulk dispenser. Powdered detergent must
be added to the single-load dispenser.
SET UP LOAD & GO
BULK
DISPENSERS (ON SOME MODELS)
DOING LAUNDRY:
BEFORE FIRST USE:
LOAD LAUNDRY
5
Single-dose laundry packets, Oxi-type
boosters, color-safe bleach, or scented
crystals can be added to the drum prior
to adding laundry. When using single-dose
laundry packets, make sure that the bulk
dispenser is disabled or off.
Place a load of sorted
items loosely in the
washer.
IMPORTANT: Push
load fully into the
washer. Make sure no
items are resting on the
rubber seal to avoid trapping them between
the seal and the door window.
2
4
Options
Cycle Status
Display
Cycle
Modiers
hold 3 sec for
Cycle Signal
hold 3 sec for
Control Lock
hold 3 sec for
FanFresh
hold 3 sec for
PreSoak
ADD HE DETERGENT, IF DESIRED
If you choose to use the Single-Load
Dispenser instead of the bulk dispenser,
add detergent to the appropriate
compartment at this time. Touch LOAD &
GO
to disable the bulk dispenser.
ADD LIQUID FABRIC SOFTENER
AND CHLORINE BLEACH TO
SINGLE-LOAD DISPENSER,
IF DESIRED
TOUCH POWER TO
TURN ON WASHER
1
SELECT A CYCLE
8
First, choose what you want to wash by
touching a selection in the top row. Next,
choose how you want to wash your load
by touching a selection in the bottom row.
ADJUST CYCLE MODIFIERS,
IF DESIRED
9
SELECT ANY ADDITIONAL OPTIONS
10
Wash & Dry (on some models): Touch to
add a drying cycle to your load after the
wash cycle has nished. The Wash & Dry
option is designed to wash and dry small
loads overnight. This option is design for
2-4 lightly soiled synthetic garments, athletic
uniforms, or workout wear. This option
has an extra-high-speed spin followed by
intermittent tumbling and fan activation to
circulate air through the clothes.
TOUCH AND HOLD START
TO BEGIN WASH CYCLE
11
Touch and hold START/PAUSE
for 3 seconds to start the wash
cycle. To pause a cycle in
progress, touch START/PAUSE
once; then touch and hold again
to continue the cycle. To cancel
a cycle, touch and hold POWER.
MAINTENANCE
Run Clean Washer cycle every 30 loads.
The washer will also give you a reminder.
Leave door open for ventilation when
machine is not in use.
Check door seal between cycles. Clean
out small items, debris, and/or lint if
present.
Clean drain pump lter occasionally.
6
7
Loading ...