Loading ...
Loading ...
Loading ...
Instruments and controls 83
As the oil level diminishes, the
squares in the display are replaced
with dashes.
▢▢▢▢▢▢ : maximum level
▢▢▢- - - : intermediate level
- - - - - - : minimum level
If the minimum engine oil level is
reached TOP-UP OIL LEVEL is
displayed in combination with control
indicator A after the ignition is
switched on for 30 seconds. Check
and top up engine oil 3 161.
To exit the oil level monitor display,
press either trip computer button.
Trip computer 3 95.
Service display
When the ignition is switched on, the
remaining distance before the next
service is due may be shown briefly in
the Driver Information Centre (DIC).
Based on driving conditions, the
interval at which a service will be
indicated can vary considerably.
When the remaining distance before
the next service is less than
3000 km or 2 months, SERVICE IN
appears in the DIC.
When the distance reaches 0 km or
the service date is due, control
indicators o and A illuminate in the
instrument cluster and SERVICE
DUE appears in the DIC.
The vehicle needs a service. Seek the
assistance of a workshop.
Resetting the service display
After a service, the service display
must be reset: if available, select the
distance before service display in the
DIC, then press and hold button on
end of wiper lever for approx.
10 seconds until the distance before
service is displayed continuously.
Trip computer 3 95.
Driver Information Centre (DIC)
3 93.
Service information 3 201.
Transmission display
The mode or selected gear of the
manual transmission automated is
shown in the transmission display.
R : reverse gear
N : neutral
A : automatic mode
kg : laden mode
V
: winter mode
T
: apply footbrake
W
: transmission electronics
Manual transmission automated
3 135.
Loading ...
Loading ...
Loading ...