Loading ...
Loading ...
Loading ...
184 Vehicle care
A spare wheel or temporary spare
wheel is not equipped with pressure
sensors. TPMS is not operational for
these wheels. For the further three
wheels, TPMS remains operational.
Control indicator w and the
corresponding message appears at
each ignition cycle until the tyres are
inflated to the correct tyre pressure.
Driver Information Centre (DIC) 3 93.
Vehicle messages 3 93.
Puncture
A puncture or severely under-inflated
tyre is indicated by illumination of
control indicator w together with C
3 89 and a corresponding message
appears in the DIC. Stop vehicle and
switch off engine.
Tyre pressure 3 227, Tyre repair kit
3 186, Spare wheel 3 191, Wheel
changing 3 189.
Relearn function
After a puncture has been repaired
and the driver has inflated the tyres to
the correct tyre pressure, TPMS
needs to recalculate.
Tyre pressure 3 227, Tyre repair kit
3 186.
During driving, select the tyre
pressure menu in the DIC by pressing
button on end of wiper lever. Press
and hold button for approx.
5 seconds to initialise recalculation. A
corresponding message appears in
the DIC.
Several minutes of driving at a speed
above 40 km/h may be required to
complete the relearn process. The
system can only provide limited
information during this time.
If problems occur during the relearn
process, control indicator w remains
illuminated and a warning message is
displayed in the DIC.
Driver Information Centre (DIC) 3 93.
Vehicle messages 3 93.
General information
The use of tyre chains or
commercially available liquid tyre
repair kits can impair the function of
the system. Factory-approved tyre
repair kits can be used.
Tyre repair kit 3 186, Tyre chains
3 186.
External high-power radio equipment
could disrupt the tyre pressure
monitoring system.
Each time the tyres are replaced,
TPMS sensors must be dismounted
and serviced by a workshop.
Loading ...
Loading ...
Loading ...