Loading ...
Loading ...
Loading ...
23
En
Additional information
Problem Check Remedy
Sound of a computer cannot be
output from this unit.
Are this unit and computer properly connected? Connect this unit and the computer directly using the included USB cable. (page
6)
Are the audio output device settings properly set? Select this unit with the audio output device settings. For instructions on making
settings for your application, see your application’s operating instructions.
Is the input selector switch set to the proper
position?
Set the input selector switch to the [USB */*] position. (Page 12)
Effect sound cannot be monitored
even when the [CUE] button for [BEAT
EFFECTS] is pressed.
— For [ECHO], [SPIRAL], [REVERB], [ROLL], [SLIP ROLL], [REV ROLL] and
[VINYL BRAKE], when the effect is off, the effect sound cannot be monitored.
This is not a malfunction.
Sound is distorted when an analog
player is connected to this unit’s
[PHONO] terminals.
Or, lighting of the channel level
indicator does not change even when
the [TRIM] control is turned.
Have you connected an analog player with a built-
in phono equalizer?
For analog players with built-in phono equalizers, connect the player to the [CD/
LINE] or [LINE] terminals. (page 5)
If the analog player with built-in phono equalizer has a PHONO/LINE selector
switch, switch it to PHONO.
Is an audio interface for computers connected
between the analog player and this unit?
If the audio interface for computers has a line level output, connect it to the [CD/
LINE] or [LINE] terminal. (page 5)
If the analog player has a PHONO/LINE selector switch, switch it to PHONO.
Loading ...
Loading ...