User Manual - Page 40

For 2020 DODGE CHALLENGER.

Loading ...
Loading ...
Loading ...
38 GETTING TO KNOW YOUR VEHICLE
Power Mirrors
The power mirror controls are located on the
driver's door trim panel.
Power Mirror Control
The power mirror controls consist of mirror
select buttons and a four-way mirror control
switch. To adjust a mirror, push either the L
(left) or R (right) button to select the mirror that
you want to adjust.
NOTE:
A light in the select button will illuminate indi-
cating the mirror is activated and can be
adjusted.
Using the mirror control switch, push on any of
the four arrows for the direction that you want
the mirror to move.
Heated Mirrors — If Equipped
These mirrors are heated to melt frost
or ice. This feature will be activated
whenever you turn on the rear window
defroster (if equipped). Refer to “Climate
Controls” in this chapter for further information.
Illuminated Vanity Mirrors
An illuminated vanity mirror is on the sun visor.
To use the mirror, rotate the sun visor down-
ward and swing the mirror cover upward. The
light turns on automatically. Close the mirror
cover to turn off the light.
Illuminated Vanity Mirror
“Slide-On-Rod” And Extender Features Of
Sun Visor
To use the “Slide-On-Rod” feature of the sun
visor, rotate the sun visor downward and swing
the sun visor so it is parallel to the side window,
pull the sun visor rearwards until it is in the
desired position. To use the extender feature of
the sun visor, grab the extender which is located
at the rear of the visor and pull rearward.
Slide-On-Rod Extender
1 — Mirror Selection
2 — Mirror Adjustment
20_LA_OM_EN_USC_t.book Page 38
Loading ...
Loading ...
Loading ...