User Manual - Page 216

For 2020 DODGE CHALLENGER.

Loading ...
Loading ...
Loading ...
214 IN CASE OF EMERGENCY
5. Raise the vehicle just enough to remove the
flat tire and install the spare tire.
6. Remove the lug nuts and tire.
7. Mount the spare tire.
Mounting Spare Tire
NOTE:
For vehicles so equipped, do not attempt to
install a center cap or wheel cover on the
compact spare.
Refer to “Compact Spare Tire” and to
“Limited-Use Spare” under “Tires” in
“Servicing And Maintenance” for additional
warnings, cautions, and information about
the spare tire, its use, and operation.
8. Install the lug nuts with the cone shaped
end of the lug nut toward the wheel. Lightly
tighten the lug nuts.
Tighten Lug Nuts
9. Lower the vehicle to the ground by turning
the jack handle counterclockwise.
10. Refer to “Wheel And Tire Torque Specifica-
tions” in “Technical Specifications” section
for proper lug nut torque.
WARNING!
Raising the vehicle higher than necessary can
make the vehicle less stable. It could slip off
the jack and hurt someone near it. Raise the
vehicle only enough to remove the tire.
CAUTION!
Do not attempt to raise the vehicle by jacking
on locations other than those indicated.
WARNING!
To avoid the risk of forcing the vehicle off the
jack, do not tighten the wheel nuts fully until
the vehicle has been lowered. Failure to
follow this warning may result in serious
injury.
20_LA_OM_EN_USC_t.book Page 214
Loading ...
Loading ...
Loading ...