Documents: Go to download!
- Owner's manual - (English)
- Product Introduction
- Maintenance
- Electric Floor Head Cleaning
- Wall Mount
- Battery
- Cleaning
- Troubleshooting
- Product Technical Parameters
Table of contents
Instruction Manual Vacuum Cleaner
Product Introduction
Maintenance
Main unit dust cleaning: To maintain the powerful suction of the vacuum cleaner, please clean up the dust cup sfter used.
- Press the button, open the bottom of the dust cup and pour out the dust.
- Rotate to the left, remove the dust cup, and clean the dust attached to the dust cup and bottom cover.
- Rotate to the left, remove the filter element, and clean the filter element.
- The port on the filter element is HEPA, which can be taken out directly for cleaning. HEPA can be washed directly with water.
- After the parts are fully dried, replace them according to the disassembly steps.
Electric Floor Head Cleaning
Wall Mount
Battery
The battery is not charged when leaving the factory, please be sure to fully charge the battery before use.
- Put the Main Motor on a horizontal table.
- The adapter Connection socket and battery begins to charge, the power light to start flashing, 3 lights are always on when fully charged
Cleaning
To avoid blocking the air duct, please clean up large pieces of garbage in the area first, such as large pieces of paper, packaging films, etc.
- Press the "start switch " to start cleaning, Switch indicator is on
- Once again "start switch " stop cleaning, the switch indicator is off
- When the machine working, press the " speed switch "can select high speed or standard speed.
- When the machine working, 3 lights are on, if only 1 light is on, please pay attention to timely charge.
- This floor head has an LED indicator, the light is on to make it easy to find and clean up the ground rubbish.
Troubleshooting
Abnormal | Possible | Causes |
Electric floor head does not work |
|
Clean up trash |
Shorter run times |
|
|
Weak Suction |
|
|
Unable to charge | The ambient temperature is too high or too low during charging | Charge the machine in a suitable temperature environment (41T-104T) |
Battery leak | Battery has not been used for a long time | Replacement battery |
Safety Instructions
This product can only be used with the original power adapter installed. If other adapters are used, the product may be damaged.
- Do not touch the power cord, socket or power adapter when your hands are wet.
- Do not let cloth curtains, II kinds of entangled substances or user's body parts get into the product driving wheel.
- Do not place this product near cigarette butts, lighters or other open flames.
- Do not bend the wires in transition, or sharp objects on the machine.
- This product is an indoor household product. Do not use it outdoors.
- This product is forbidden to weigh more than 10Kg (person).
- Do not use this product in a humid environment (such as a bathroom), do not suck liquid.
- Before using this product, please remove all fragile items on the floor (such as glasses, lamps) and items that may entangle the floor head and suction channels (such as wires, paper, curtains).
- Remove the battery from the machine before discarding this product.
Product Technical Parameters
WARNING
- In removing the battery, the product must be off.
- Do not use and store the battery in the environment below 41°F and above 104°F.
- When disposing of this product, please remove the battery from the whole machine
- It is strictly forbidden to modify the whole machine, accessories and replace the power supply or battery.
- Do not mount the wall on a weak wall such as gypsum board or a board with a thickness of less than 10mm.
- Do not install on metal wall to prevent fire or electric shock due to leakage.
- Make sure the wall where the wall mount is installed is not uneven.
- Please avoid installing the wall mount in a high temperature above 104°F or a low temperature below 41°T
- Make sure that the installation location does not penetrate the pipes and wiring such as air pipes and water pipes on the back of the wall.
- Please make sure that the floor head will not touch the ground when the machine is hung on the bracket after installation
- Do not apply brute force to the wall mount.
- When storing, please replace the extension tube and the floor head. Do not run it when it is placed.
- Do not place the accessory brush on the wall-mounted with the extension brush connected.
- Do not allow other objects to touch the floor head or extension tube during storage. Regularly confirm whether the wall mount is stable. Please re-tighten the screws when they are loose.
See other models: H594 360LED-XCQ-ZWJ-1PACK