Loading ...
Loading ...
3SAFETY
This manual explains the proper use of your new Beefeater
canopy cooker hood. Please read this manual carefully
before using the product. This manual should be kept in
a safe place for handy reference.
This cooker hood is a domestic appliance which has been
manufactured and tested to comply with Australian and
New Zealand Standard AS/NZS 60335.2.31
WARNING!
Follow these instructions carefully to avoid an electric
shock or fire.
• Young children should be supervised to ensure they do
not play with the canopy rangehood.
• This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning the use of the appliance by a
person responsible for their safety.
• Ensure the canopy rangehood is switched off before
carrying out maintenance, to avoid any possibility of
electric shock.
• Never carry out flambé cooking under the canopy
rangehood.
• This canopy rangehood is recommended for
barbecues when installed according to AS/NZS5601.
• This canopy rangehood can be installed for outdoor
use if in a sheltered location that protects the
appliance from the weather.
• The exhaust from the canopy rangehood must not
be discharged into any heating flue, which may carry
combustion products from other sources. (Fig. 1)
• Exhaust air must not be discharged into a wall cavity,
unless the cavity is designed for the purpose.
• There must be adequate ventilation of the room when
the canopy rangehood is used at the same time as
appliances burning gas or other fuels.
• Always cover lit gas burners with pots or pans when
canopy rangehood is in use.
• Always switch off gas burners before you remove pots
or pans.
• Do not leave lit gas burners exposed due to the risk of
fire. (Fig. 2)
WARNING!
Accessible parts may become hot when used with cooking
appliances.
IMPORTANT SAFETY INSTRUCTIONS
ELECTRICAL CONNECTION
Check that the mains voltage matches with the voltage on
the data plate inside the canopy cooker hood. Check that the
installation complies with standards of local building, gas
and electrical authorities. Before connecting to the mains
supply ensure that the mains voltage corresponds to the
voltage on the rating plate inside the cooker hood.
If the supply cord is damaged, it must be replaced by the
manufacturer or its service agent or similarly qualified
person in order to avoid a hazard.
SAFETY WARNINGS – FOR THE INSTALLER
When installing the cooker hood, make sure you adhere
to the minimum and maximum distances from the cooker
hood base to the hob or barbecue surface (as per table in
“Installation” section).
EXHAUST FLUE INSTALLATION
The following rules must be strictly followed to obtain
optimal air extraction.
• Keep exhaust flue short and straight
• Do not reduce the size or restrict exhaust flue
• Keep bends in the exhaust flue to a minimum
• When using flexible flue always install duct with helix
pulled taut to minimise pressure loss
• Failure to observe these basic instructions will
drastically reduce the performance and increase the
noise levels of the cooker hood.
NOTE: Some installations may require the exhaust cover
to be cut to length. If required, cut with sharp tin snips or a
fine-tooth hack saw blade, taking care not to distort or dent
the exhaust cover.
Fig. 1 Fig. 2
IMPORTANT SAFETY INSTRUCTIONS
Loading ...
Loading ...
Loading ...