Loading ...
Loading ...
Loading ...
10 MAINTENANCE AND CLEANING
Changing the halogen lamps
WARNING!
Ensure lamp is cool before removing.
Using a small flat blade screw driver remove the inner
stainless steel ring to obtain access to the halogen globe.
When removing the inner ring, do so carefully, as the glass
lense could easily fall out of the inner ring. Remove the
halogen globe, whilst cool, and replace carefully with
a new globe.
The cooker hood has 4 x 20W, 12 volt halogen globes.
IMPORTANT!
When handling globes hold with a cloth or gloves to
ensure perspiration does not come into contact with
a globe as this can reduce the life of the globe.
Troubleshooting guide
PROBLEM REMEDY
The cooker hood will not start • Check that cooker hood is connected to an electrical supply.
• Check that a fan speed has been selected.
The cooker hood is not working • Check that fan speed is high enough for the task.
• The grease filters are clean.
• The kitchen is adequately vented to allow entry of fresh air.
• Check ducting and outlets are not blocked.
The cooker hood has switched off during
operation
• The safety device may have tripped – turn off the cooking appliance
and wait for the device to reset. If the hood is installed below the
heights indicated in the installation instructions the motor will cut out
frequently which will damage the cooker hood.
If you have completed all of the above checks and are
still experiencing difficulty, please contact your local
Electrolux Service Centre.
MAINTENANCE AND CLEANING
Loading ...
Loading ...
Loading ...