Loading ...
Loading ...
Loading ...
6
1 2
1
2
1234
A
B
C
3
4 5 6
When the machine is switched on for the fi rst time, it requires the selection of the desired language. This
allows you to adjust the parameters of the beverage to the typical parameters of the country where the
machine is used. This is why some languages are differentiated also by country.
SETTING THE LANGUAGE
INSTALLATION
8:30 am
15/06/06
English
italiano (it)
Italiano (ch)
Deutsch
English
italiano (it)
Italiano (ch)
Deutsch
warming up
Press .
Select the desired language. If
necessary, press the
key to
display additional languages.
Wait until the machine completes
the warming phase.
rinse
When the correct temperature is
reached, the machine performs a
rinse cycle of the internal circuits.
rinse
A small quantity of water is
dispensed. Wait for this cycle to be
completed automatically. Refer to
page 22 to enable/disable the rinse
function.
The main screen for beverage
selection appears on the display.
Set the clock and the calendar of
the machine as shown on page 24.
1.2.1.1.1 language
1.2.1.1.1 language
Immerse the water hardness test strip
in water for 1 second.
Check the water hardness value and set:
- the machine water hardness level (page 22);
- the Intenza Aroma System (page 7).
SETTING THE WATER HARDNESS
Intenza Aroma System
Machine water hardness setting
The test strip can only be used for one measurement.
Loading ...
Loading ...
Loading ...