Loading ...
Loading ...
Loading ...
9. Check to make sure the child restraint is
properly secured prior to each use. If the
seat belt is not locked, repeat steps 2
through 8.
10. If the child restraint is installed in the front
passenger seat, place the ignition switch in
the ON position. The front passenger air bag
status light
should illuminate. If this
light is not illuminated, see ⬙Front passenger
air bag and status light⬙ in this section.
Move the child restraint to another
seating position. Have the system
checked by a NISSAN dealer.
After the child restraint is removed and the seat
belt is fully retracted, the ALR mode (child re-
straint mode) is canceled.
INSTALLING TOP TETHER STRAP
First, secure the child restraint with the LATCH
lower anchors (rear outboard seat positions only)
or the seat belt, as applicable.
1. Flip up the anchor cover
䊊
1
from the anchor
point which is located directly behind the
child seat.
Forward-facing – step 10
WRS0475
WRS0760
1-32 Safety—Seats, seat belts and supplemental restraint system
Loading ...
Loading ...
Loading ...