Customer assistance for air filters cleaning (E1 code)
on Sharp Air Conditioners.
The display will indicate an E1 code and not allow the unit to operate until the code is cleared when it is
time to clean the filter. For proper clearing of the display and continued operation, assist the customer
with the following guideline when they have a question with the operation manual.
<Applicable page on operation manual >
AF-S60FX / AF-S80FX / AF-S85FX / AF-R80FX …(Page 17)
AF-S100FX / AF-S120FX / AF-S125FX / AF-R100FX / AF-R120FX …(Page 16)
If any customer has a continued problem or can not clear the display following these instruction,
have them contact 1-800-BE-SHARP (1-800-237-4277).
Product which has been used for
rental and/or commercial purposes
1
2
3
4
5
6
7
8
9
10
11
,
,
1
2
A.Hold the Accordion Panel in one hand and gently
pull back the panel beyond the ends of the frame.
See FIG 2.
B.Slide the free end ( I section) of the panel into the
cabinet as shown in FIG 3,& 4.Slide the panel down.
Be sure to leave enough space to slip the top and bottom
of the frame into the rails on the cabinet.
,,
,,
C.Once the panel has been installed on the side of
the cabinet,make sure it sits securely inside the frame
channel.Slide the top and bottom ends of the frame
into the top and bottom rails of the cabinet.FIG 5.
3
4
5
FIG. 4
FIG. 4
FIG.5
FIG.5
6
7
8
MED
HIGH
HIGH
MED.
MED.
.
.
remain OFF and the display will go off.
Raise Temp.
Lower temp.
7
hours
when power is restored
CLICK
