Loading ...
Loading ...
Loading ...
34
Cakes high in middle with
crack on top
Oven temperature too high
Baking time too long
Pans touching each other or oven walls
Incorrect rack position
Pan size too small
Piecrust edges too brown
Oven temperature too high
Edges of crust too thin
SOLVING OPERATIONAL PROBLEMS
Before calling for service, check the following to avoid unnecessary service charges.
Oven Problem Problem Solving Steps
The oven display
stays OFF
Turn o power at the main power supply (fuse or breaker
box). Turn breaker back on. If condition persists, call an
authorized service center.
Cooling fan continues
to run after oven is
turned o
The fan turns o automatically when the electronic
components have cooled suciently.
Oven is not heating Check the circuit breaker or fuse box to your house.
Make sure there is proper electrical power to the oven.
Make sure the oven temperature has been selected.
Oven is not cooking
evenly
Check oven calibration. Adjust calibration if necessary.
Refer to cook charts for recommended rack position.
Always reduce recipe temperature by 25 °F (15 °C) when
baking with Convention Bake mode.
Oven temperature is
too hot or too cold
The oven thermostat needs adjustment. See Calibrating
Oven Temperature.
Oven light is not
working properly
Replace or reinsert the light bulb if loose or defective.
Touching the bulb with ngers may cause the bulb to
burn out.
Oven light stays on
Check for obstruction in oven door. Check to see if hinge
is bent or door switch broken.
Cannot remove lens
cover on light
There may be a soil build-up around the lens cover. Wipe
lens cover area with a clean dry towel prior to attempting
to remove the lens cover.
Clock and timer are
not working properly
Make sure there is proper electrical power to the oven.
See the Clock and Timer sections.
Excessive moisture
When using bake mode, preheat the oven rst.
Convection Bake and Convection Roast will eliminate
any moisture in oven (this is one of the advantages of
convection).
Porcelain chips
When oven racks are removed and replaced, always tilt
racks upward and do not force them to avoid chipping the
porcelain.
FOR MORE HELP, VISIT HAIER.COM OR CALL THE CONSUMER
HELP LINE AT 1-877-377-3639.
Loading ...
Loading ...