Loading ...
Loading ...
Loading ...
19
If rack is in separate pieces, press tabs
down and insert rear into front.
Insert rack until
tabs click.
After use, press
tabs down and
collapse rack for
storage.
NOTE
The drying rack accessory should only be
used with time dry cycles. Use of rack
with auto dry cycles will result in a short-
ened cycle with unwanted drying results.
Controls and Settings
Optional Drying Rack
(not included)
Use the drying rack for items which should
not be tumble dried. Extend the collapsed
drying rack and insert the rack into the
dryer drum. Place the front legs into the
front air grill and lower the rear of the rack
onto the back of the dryer drum.
Place items to be dried on top of the rack,
leaving space between items and not
allowing them to hang over the sides or
through the holes. The weight should not
exceed 10 lbs (4.5 kg).
Select the air dry setting for items con-
taining plastic, foam rubber, rubber-like
materials, feathers or down. When items
are dry, remove the rack and store it in a
convenient location.
Assemble the drying rack
Installing drying rack
Front legs in
side of grill
Rear legs
on drum
backsheet
Back-
sheet
of dryer
drum
Install the drying rack
NOTE
For step-by-step instructions cleaning
the lint filter, refer to
Cleaning the Filter
in
the Care & Cleaning
section of this Use
and Care Guide.
See the Accessories section of the
Installation Instructions for ordering
information.
Loading ...
Loading ...
Loading ...