Loading ...
Loading ...
Loading ...
18
Controls and Settings
Other Features
LED Display
chime
A signal will sound at the end of the cycle
(and periodically during extended tumble
or wrinkle release). To mute or unmute
the chime, press and hold the select but-
ton for 3 seconds.
Muting the end of cycle signal will not
mute the button tones.
options
select
de-select
hold ‘select’ 3 s to mute/unmute
NOTE
For step-by-step instructions on door re-
versal, refer to the
Installation Instructions
supplied with this dryer.
WARNING
Clean the filter after every load. A
CLEAN LINT message will appear on
the LED display at the end of the cycle
to remind you to remove the lint from
the filter.
LuxCare
TM
Lint Shield filter
The dryer is equipped with a clamshell
style LuxCare
TM
Lint Shield filter.
control lock
To lock the controls between cycles,
scroll to the control lock option and
press select. The control lock icon
will show on the LED display. To unlock the
controls scroll to the control lock option again
and press select. Use this feature to reduce
the likelihood of accidental operation by
children. Dryer cycles will not run when
Control Lock is activated.
The estimated cycle time for auto dry,
the actual time for time dry, or the delay
time countdown will be displayed when
the cycle is selected. Once the cycle has
started, the estimated remaining time
will be displayed for the remainder of the
cycle.
As the dryer progresses through the cycle
phases, the row of cycle phase indicators
lights up under the cycle time.
Delay time, eco, control lock, mute
(select models), and clean lint icons will
also appear on this LED display when
activated.
Drum Light (on select models)
The drum light will come on whenever
the door is opened to illuminate the drum
during loading and unloading. Closing the
door turns off the light. The drum light will
automatically turn off if the door is left open
more than 3 minutes.
Reversible Door
The dryer is equipped with a reversible
door. The door can be hinged on the right
or left side.
NOTE
While counting down during delay time,
you will notice your dryer periodically
tumbling for a few minutes without heat
to redistribute the load, maximizing load
freshness.
during off-peak energy hours. The start of
any cycle can be delayed for 30 minutes
to 12 hours. After selecting the delay time
option, use the cycle selector to scroll to
the desired delay time and press start. The
delay time icon will illuminate on the LED
display to indicate the delay time option is
activated, The delay time will begin counting
down on the LED display once activated.
Icons may vary according to model.
Loading ...
Loading ...
Loading ...