Loading ...
Loading ...
Loading ...
Setting Electronic Speed Control at a Desired
Speed
When the vehicle has reached the desired speed, press
the SET lever downward and then release. Lift your foot
off the accelerator and the vehicle will operate at the
selected speed.
Deactivating Electronic Speed Control
A soft tap on the brake pedal or pulling the lever
CANCEL toward you, will deactivate the speed control
without erasing the set speed memory. Pushing the
ON/OFF button to the OFF position or turning OFF the
ignition erases the set speed memory.
Resuming Speed
To resume a previously set speed, raise the lever
RESUME/ACCEL upwards and release. Resume can be
used at any speed above 25 mph (40 km/h).
Varying The Speed Setting
When the speed control is SET, speed can be increased by
raising and holding the RESUME/ACCEL lever up-
wards. When released, a new set speed will be estab-
lished.
Raising the lever RESUME/ACCEL upwards once will
result in a 1 mph (1 km/h) speed increase. Each time the
lever is tapped upwards, speed increases so that tapping
the lever three times will increase speed by 3 mph (5
km/h), etc.
To decrease speed while speed control is SET, press the
lever SET/DECEL downward and hold. Release the lever
when the desired speed is reached, and the new speed
will be SET.
Tapping the lever SET/DECEL downward once will
result in a 1 mph (1 km/h) speed decrease. Each time the
lever is tapped downward, speed decreases.
178 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Loading ...
Loading ...
Loading ...