Loading ...
Loading ...
Loading ...
Installation
57
EN
Replacing the gas grill nozzle (on some
models only)
1. Open the door.
2. Completely remove all accessories from
inside the oven.
3. Loosen the screw B.
4. Slide the burner outwards until the nozzle
is accessible.
5. Replace the nozzle using a 7mm socket
wrench.
Adjusting the minimum
The oven thermostat is equipped with a
screw for adjusting the minimum. When
changing the type of supplied gas, the
minimum must be adjusted as follows:
1. Disconnect the appliance from the power
supply.
2. Pull the oven slightly out from its seat, take
out the knobs and remove the front panel
by unscrewing the 4 screws (2 top and 2
bottom) that secure it to the rest of the
appliance.
3. Insert the oven thermostat knob and light
the oven burner. Keep it at the maximum
for 10/15 minutes with the door closed.
After this period, move the knob to the
minimum temperature.
4. Slide off the knob and insert a straight
edge screwdriver into the hole A to
make the adjustment.
5. If using liquid gas the adjustment screw B
must be tightened clockwise to the very
end.
Loading ...
Loading ...
Loading ...