Loading ...
Loading ...
Loading ...
• Make sure that you test the coverage of the detector by
pressing the Walk Test button on the side. For the next
10 minutes, the red LED will illuminate when it senses
movement, allowing you to adjust the aim of the detector
using a screwdriver so that it covers the desired protection
area.
Adjust With Screwdriver
• You can use the supplied mounting tape on at walls
if you don’t want to use the wall bracket.
Double Stick Tape Here For Flat Walls
• Make sure that there are no objects blocking the detector's
view and that it's in a stable location.
• Make sure that the detector is not aimed at stairs, furniture,
or other surfaces where a pet might climb, or used in a room
where large pets (over 55 lbs) may be present and could
cause false alarms.
• Make sure that the detector is not placed near a source
of heat that could cause false alarms, e.g. a heating vent
or replace.
ADT Motion Detector ADT Motion Detector
Loading ...
Loading ...
Loading ...