Loading ...
Loading ...
Loading ...
17
EN
Select options, if needed
If you want to select additional options,
make sure that the options button lights
up. The options which are selectable for your
programme are indicated by lighting arrows.
Turn the knob to select the desired options. The
symbol of the selected optionblinks.
To conrm it, press the knob. The option symbol
lights up solidly.
Some options / functions can be selected by
directly pressing the button:
Refer to section PROGRAMMES, OPTIONS AND
FUNCTIONS for more information.
INDIVIDUAL MODE
After you have switched on the washing machine,
you are not forced to follow the GUIDED MODE.
It is up to you which order you choose to set your
programme. To do a setting, rst press the relevant
button, then turn the knob to select, and nally
press the knob to conrm.
The range of temperatures, spin speeds and
options depend on the programme selected.
Therefore it is recommended to start your setting
with selecting the programme.
6. ADD DETERGENT
If you do not use the Dosing Aid function,
pull out the detergent dispenser and
add detergent (and additives/softener) now, as
indicated in section DETERGENT DISPENSER.
Observe the dosing recommendations on the
detergent pack. If you have selected PREWASH or
START DELAY, observe the instructions in section
PROGRAMMES, OPTIONS AND FUNCTIONS.
Afterwards carefully close the detergent
dispenser again.
If you use the “Dosing Aid” function, add
detergent later, after you have started the
programme. Refer to section DOSING AID/DAILY
USE.
Correct dosing of detergent / additives is
important, because
it optimizes the cleaning result
it avoids irritating residues of surplus detergent in
your laundry
it saves money by avoiding waste of surplus
detergent
it protects the washing machine by avoiding
calcication of components
it respects the environment by avoiding
unnecessary environmental burden
7. START PROGRAMME
Press and hold “Start/Pause” until the
button lights up solidly; the programme will
start.
If you have selected “Dosing Aid”, the washing
machine indicates the recommended detergent
amount for your laundry load a short time after
programme start. – Add your detergent to the
main wash compartment of the detergent
dispenser, or directly into the drum in a detergent
ball.
If you have selected “Dosing Aid” and also
“Prewash”, the washing machine will alternately
indicate you the recommended detergent
amount for the Prewash (I) and the Main wash (II)
compartment.
Add the recommended detergent amounts to the
compartments and press “Start/Pause” to
proceed with the programme.
To avoid overow, do not open the detergent
dispenser during a running programme anymore.
The remaining programme duration which is
indicated on the display can vary. Factors like
unbalance in the wash load, or foam formation,
can have an eect on the programme duration.
Whenever the remaining programme duration is
calculated newly, an animation appears on the
display.
Loading ...
Loading ...
Loading ...