Loading ...
Loading ...
Loading ...
en Faults and what to do about them.
38
Loud noises, vibrations
and machine “wander-
ing” during the spin cycle.
■ Is the appliance level? Make the appliance level. ~ Page 17
■ Are the appliance's feet secured? Secure the appliance's feet. ~ Page 17
■ Have the transport braces been removed? Remove the transport braces.
~ Page 13
The display panel/indica-
tor lights do not work
while the appliance is run-
ning.
■ Has there been a power failure?
■ Have the fuses blown/has the circuit breaker tripped? Switch on the circuit
breaker/replace the fuses.
■ If the fault occurs repeatedly, call the after-sales service.
There is detergent resi-
due on the laundry.
■ Some phosphate-free detergents contain water-insoluble residue.
■ Select q Rinse or brush the laundry after washing.
The Õ symbol is lit in the
display panel when
paused.
■ The water level is too high. It is not possible to add laundry. Close the door
immediately if necessary.
■ Press the ‹ button to resume the programme.
The Õ symbol in the dis-
play panel is off when
paused.
The door is unlocked. It is possible to add laundry.
If you cannot rectify a fault yourself (after switching the machine off and then on again) or a repair is required:
■ Switch off the appliance and pull the mains plug out of the socket.
■ Turn off the tap and call the after-sales service.
Faults Cause/remedy
Loading ...
Loading ...