Loading ...
Loading ...
Loading ...
16
Connecting the Water Supply
Steel
Clamp
Stainless
Steel
water Line
Water Valve
Bracket
Valve Inlet
Water Valve
6 ft. Stainless Steel water line
from household water supply
Plastic Water Tubing
to Ice Maker
Fill Tube
Figure 2
Figure 1
Plastic Water Tubing
to Ice Maker
Fill Tube
Steel
Clamp
Brass
Compression
Nut
Ferrule
(Sleeve)
Copper
water line
Water Valve
Bracket
Valve Inlet
Water Valve
Copper water line
from household
water supply
(Include enough tubing in loop to
allow moving refrigerator out
for cleaning)
IMPORTANT
After connecting the water supply, refer to
“How to Prime the Water Supply System”
for important information about priming
an empty water supply system.
Your refrigerator’s water supply system
includes several tubing lines, a water
lter, a water valve, and a water tank. To
ensure that your water dispenser works
properly, this system must be completely
lled with water when your refrigerator
is rst connected to the household water
supply line.
5. With steel clamp and screw, secure
water supply line (copper tubing only) to
rear panel of refrigerator as shown.
6. Coil excess water supply line (copper
tubing only), about 2½ turns, behind
refrigerator as shown and arrange coils
so they do not vibrate or wear against
any other surface.
7. Turn ON water supply at shuto valve
and tighten any connections that leak.
8. Reconnect refrigerator to electrical
power source.
Loading ...
Loading ...
Loading ...