Loading ...
Loading ...
Loading ...
°C
°F
°F/
°C
RUN
Installation
Page 8
WARNING
To reduce the risk of fire, electrical
shock, or injury when using your
appliance, follow these basic
precautions:
Read all instructions before using the
Ÿ
Beverage Cabinet.
DANGER or WARNING: Risk of child
Ÿ
entrapment.
Child entrapment and suffocation are not
problems of the past. Junked or
abandoned appliances are still dangerous
. . . even if they will “just sit in the garage a
few days”.
Before you throw away your old
Ÿ
Beverage Cabinet: Take off the door.
Leave the shelves in place so that children
may not easily climb inside
Never allow children to operate, play with,
Ÿ
or crawl inside the appliance.
Never clean appliance parts with
Ÿ
flammable fluids. The fumes can create a
fire hazard or explosion.
Do not store or use gasoline or any other
Ÿ
flammable vapors and liquids in the
vicinity of this or any other appliance. The
fumes can create a fire hazard or
explosion.
Before using your Beverage Cabinet
Remove the exterior and interior packing.
Ÿ
Check to be sure you have all of the
Ÿ
following parts:
- 7 x Wire Shelves
- 2 x Keys
- 1 x Stainless Steel Handle Assembly
with Hardware
- 2 x Decorative Screws.
- 1 x Instruction Manual.
Before connecting the Beverage Cabinet
Ÿ
to the power source, let it stand upright for
approximately 2 hours. This will reduce
the possibility of a malfunction in the
cooling system from handling during
transportation.
Clean the interior surface with lukewarm
Ÿ
water using a soft cloth.
Install the handle on the left side of the
Ÿ
door.
Installation of your Beverage Cabinet
This appliance is designed to be for free
Ÿ
standing installation or built-in (fully
recessed).
Place your Beverage Cabinet on a floor
Ÿ
that is strong enough to support it when it
is fully loaded. To level your Beverage
Cabinet, adjust the front levelling legs at
the bottom of the Beverage Cabinet.
Locate the Beverage Cabinet away from
Ÿ
direct sunlight and sources of heat (stove,
heater, radiator, etc.). Direct sunlight may
affect the acrylic coating and heat sources
may increase electrical consumption.
Extreme cold ambient temperatures may
also cause the unit not to perform
properly.
Avoid locating the unit in moist areas.
Ÿ
Plug the Beverage Cabinet into an
Ÿ
exclusive, properly installed-grounded
wall outlet. Do not under any
circumstances cut or remove the third
(ground) prong from the power cord. Any
questions concerning power and/or
grounding should be directed toward a
certified electrician or an authorised
service center.
Loading ...
Loading ...
Loading ...