Loading ...
Loading ...
Loading ...
Page 10
Using Your Beverage Cabinet
°C
°F
°F/
°C
The temperature range of this Beverage
Ÿ
Cabinet is 2ºC to 10ºC.
It is recommended you install the
Ÿ
Beverage Cabinet in a place where the
ambient temperature is between
18º~30ºC/ 64º~86ºF. If the ambient
temperature is above or below
recommended temperatures, the
performance of the unit may be affected.
For example, placing your unit in extreme
cold or hot conditions may cause interior
temperatures to fluctuate and the range of
2ºC to 10ºC may not be reached.
You can select temperature display
Ÿ
setting from Fahrenheit to Celsius degree
by touching the ºF/ºC mark. Fahrenheit or
Celsius degrees indicator will appear in
green color in the temperature display
window.
ON/OFF Power
To turn the appliance ON or OFF, press
Ÿ
and hold the POWER button for 2
seconds.
To Lock the Control Panel
Your Beverage Cabinet is equipped with
Ÿ
an automatic Control panel lock function.
This function will prevent any unwanted
changes to your temperature or power
settings.
The lock function will activate
Ÿ
automatically 12 seconds after the last
time a button is pushed on the control
panel.
To unlock the control panel lock press and
Ÿ
hold the UP and DOWN arrow buttons for
2 seconds the control panel will beep and
blink once indicating that the control panel
is active and the settings can be changed.
Setting the Temperature Control
You can set the temperature as you desire
Ÿ
by touching the UP or DOWN arrow
buttons. When you touch the two buttons
for the first time, the LED readout will show
the original temperature set at previous
time (the temperature preset at the factory
is 6ºC).
The temperature that you desire to set will
Ÿ
increase 1ºF or 1ºC if you touch the UP
button once, on the contrary the
temperature will decrease 1ºF or 1ºC if you
touch the DOWN button once.
The temperature inside the unit will
Ÿ
appear in blue in the display window.
NOTE:
If the unit is unplugged, power lost, or
Ÿ
turned off, you must wait 3 to 5 minutes
before restarting the unit. If you attempt to
restart before this time delay, the
Beverage Cabinet will not start.
When you use the Beverage Cabinet for
Ÿ
the first time or restart the Beverage
Cabinet after having been shut off for a
long time, there could be a few degrees
variance between the temperature you
select and the one indicated on the LED
readout. This is normal and it is due to the
length of the activation time. Once the
Beverage Cabinet is running for a few
hours everything will be back to normal.
UNLOCK
Loading ...
Loading ...
Loading ...