Loading ...
Loading ...
Loading ...
7
READY light illuminates.
- Place the food on the cooking plate.
- Carefully close the lid.
- Exact cooking time will be a matter of taste. It will also
depend on type of meat or vegetables used.
Please note: in contact grill mode, this appliance is
suitable for cooking thin steaks, slices of bacon, hamburgers,
and thin slices of vegetables, sh and chicken.
The food's thickness should not exceed 0.6 in (1.5 cm) for
meat, sh, or 0.4 in (1 cm) for vegetables. Overly large foods
will make it impossible for the appliance to stay completely
closed during cooking operation, compromising safe
operation and cooking performance.
Please note: The green READY light will cycle on and
o during the cooking process to indicate that the correct
temperature is being maintained.
Please note: The lid must be closed at all times when
cooking.
CLEANING AND MAINTENANCE
User maintenance
- Before cleaning, ensure the On/o switch is set to the
OFF position and then remove the power plug from the
power outlet.
- Allow your appliance to cool a bit before cleaning. The
appliance is easier to clean when slightly warm.
- Always clean your appliance after each use to prevent
the buildup of any remaining foods. Wipe the cooking
plates and drain hole with a soft cloth to remove food
residue.
- Empty the oil tray. It can be washed by hand or in the
dishwasher.
Important! DO NOT IMMERSE THE APPLIANCE IN
WATER OR ANY OTHER LIQUID.
Non-stick coating
Cooking on a non-stick surface minimizes the need for oil,
as food does not stick and cleaning is easier. When cleaning
the non-stick coating, do not use metal (or other abrasive)
scourers.
Wash with warm soapy water. The cooking plates are dish-
washer safe, although frequent washing in a dishwasher
could reduce the properties of the coating. It is therefore
recommended to clean the outside of the cooking plate with
a soft sponge or cloth dampened with water and mild deter-
gent. Remove stubborn residue with a non abrasive plastic
scouring pad or nylon washing brush.
STORAGE
To store your appliance:
- Ensure the On/o switch is set to the OFF position and
then unplug the power cord from the power outlet.
- Allow the appliance to fully cool down.
- Set the plates into the locked position.
- Wrap the power cord in the cord wrap area underneath
the appliance.
- Store on a flat, dry, level surface.
PROBLEM CAUSE SOLUTION
If the appliance doesn't heat
up
Be sure the power plug is properly inserted
into wall outlet
Be sure the appliance's main switch is
pushed in ON position
Plug into the power outlet or Insert the power
plug into a dierent outlet
Push the
On/o switch
Verify the circuit breaker
Note: if After all checkings the problem persists, t
he appliance probably has a malfunction. Contact a De’Longhi customer
service
TROUBLESHOOTING
Loading ...
Loading ...