Loading ...
Loading ...
Loading ...
Safety Precautions
6
When in Use
Caution
Do not place heavy objects on
the projector.
It may fall and cause injury.
Be careful not to allow impact to
the lens during transport.
Do not touch the lens. The lens
may be damaged.
Miscellaneous
Caution
Cleaning
Caution
You need to clean the projec-
tor periodically.
If you do not clean the projector,
dust will accumulate inside and
may create a fire hazard or mal-
function.
When cleaning plastic parts such as the projector case, unplug the power
first and wipe with a soft cloth. Do not spray with water or wipe with a wet
cloth. Never use glass cleaner, automobile or industrial shiner, abrasives
or wax, benzene, alcohol etc., which can damage the projector.
This may create a fire hazard, result in electric shock or product damage (deforma-
tion, corrosion or breakage).
Cleaning
Warning
Do not spray the projector with
water when cleaning. Make sure
water does not flow into the pro-
jector.
This may create a fire hazard or cause
electric shock.
In the unlikely event of smoke or a
strange smell coming out from the
projector, switch it off, unplug it
from the power outlet and contact
the LG Electronics Service Center.
Otherwise, it may create a fire hazard or
result in electric shock.
Use an air spray or soft cloth or
cotton swab moistened with a lens
cleaning chemical or alcohol to
remove dust or stains on the front
projection lens.
Miscellaneous
Warning
Only a qualified technician can disassemble or modify the projector. For diagnosis, adjustment, or repair, con-
tact your seller or service center.
This may create a fire hazard or cause electric shock.
Be sure to unplug if the projector is
not to be used for a long period.
Accumulated dust is a fire hazard and may
result in electric shock due to overheating,
ignition, or poor insulation.
Do not mix new batteries with
old ones.
Burst or leaking batteries are a fire
hazard or may result in electric shock.
Only use the specified type of
battery.
Burst or leaking batteries are a fire
hazard and are toxic.
When in Use
Warning
If there is a gas leak, do not touch the power outlet, and open the win-
dows for ventilation.
Sparks may cause fire or burns.
Always open the lens door and
remove the lens cap when the
projector lamp is on.
Do not use any sharp tools on the
projector such as a knife or ham-
mer, because this may damage the
casing.
In the event that no image appears
on the screen, please switch off the
projector, unplug it from the power
outlet and contact the LG
Electronics Service Center.
This may create a fire hazard or cause
electric shock.
Do not drop anything onto the
projector or allow anything to
impact the projector.
This may cause mechanical failure or
personal injury.
Loading ...
Loading ...
Loading ...