CF3DAT User Manual

Loading ...

Function

Network Settings

< Notes >

• Use a standard LAN cable with this projector. (Cat5, Cat5E, or Cat6 with an RJ45 connector)

• If you experience any connection problems, restart your modem.

• A 10 Base-T or 100 Base-TX LAN port is required to connect to this projector. If your ISP (Internet Service Provider)

does not provide such a connection, you will not be able to connect the projector to the network.

• To connect to a wireless router, a router that supports wireless connection is necessary; the wireless connection function

of the corresponding router must also be activated. Ask the router manufacturer whether the router supports wireless

connection.

• To connect to a wireless router, verify the SSID and security settings of the wireless router. Please refer to the user

guide of the corresponding router regarding SSID and security settings of the wireless router.

• The projector may not work properly if network devices (wire/wireless router or hub, etc.) are incorrectly set up. Be sure

to install the devices correctly by referring to their user guides before configuring network settings.

• When Ad-hoc is used, the projector may not be able to connect depending on the device (for example: notebook

computer) that is connected.

• The connection method may vary according to the manufacturer of the wireless router.

1. Press the MENU button, then go to OPTION with the ∧,∨,＜,

＞ buttons and press OK

󲄇

2. Press the ∧,∨buttons to go to High Altitude and press OK

󲄇

3. Press the ＜,＞ buttons to select On and press OK

󲄇

ꔈPress the BACK button to exit the menu screen.

High Altitude

OPTION

Menu Language : English

Audio Language : English

Caption : Text 1

Blank Image : Black

Camera Calibration

Lamp Mode : Normal

High Altitude : Off ꔉ

Network Setting

Set ID : 1

ꔂ Move ꔉ OK

* High Altitude is used at environments higher than 4,000 feet.

1. Press the MENU button, then go to OPTION with the ∧,∨,＜,＞

buttons and press OK

󲄇

2. Press the ∧,∨ buttons to go to Lamp Mode.

3. Press the∧,∨ buttons to select an option.

(Normal, Economic)

ꔈ If room temperature is over

35°C

or the 3D video is working, this is not

available.

ꔈ You can select this function through the MENU button.

ꔈ Press the BACK button to exit the menu screen.

To adjust the brightness of the screen