Loading ...
Loading ...
Loading ...
12 13OPERATING INSTRUCTIONSOPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS
Activation and deactivation
Touch for 1 second to activate or deactivate
the appliance.
Automatic switch off
The function deactivates the appliance automatically if:
• All cooking zones are deactivated (
).
• You do not set the heat setting after you activate
the appliance.
• You spill something or put something on the control
panel for more than 10 seconds, (a pan, a cloth, etc).
The sound operates some time and the appliance
deactivates. Remove the object or clean the
control panel.
• The appliance become too hot (e.g. when a saucepan
boils dry). Before you use the appliance again, the
cooking zone must be cool.
• You use incorrect cookware. The symbol
comes on
and the cooking zone deactivates automatically after
2 minutes.
• You do not deactivate a cooking zone or change the
heat setting. After some time,
comes on and the
appliance deactivates. See the Heat Setting display
table below.
The times of Automatic Switch Off
HEAT
SETTING
COOKING ZONE
DEACTIVATES AFTER
-
6 hours
-
5 hours
4 hours
-
1.5 hours
The heat setting
Touch adjacent to the element you want to control
to increase the heat setting. Touch adjacent to the
element you want to control to decrease the heat setting.
The display shows the heat setting. Touch
and
adjacent to the element you want to control at the
same time to deactivate the cooking zone (applies to
WHI643BC, WHI633BC, WHI743BC and WHI943BC).
Touch the control bar at the heat setting. Chnage to the
left or the right, if it is neccessary. Do not release before
you have a correct heat setting. The display shows the
heat setting. (applies to WHI645BC and WHI945BC)
Automatic heat up
You can get a
necessary heat setting
in a shorter time if you
activate the Automatic
Heat Up function.
This function sets the
highest heat setting
for some time (see
the illustration), and
then decreases to the
necessary heat setting.
To start the Automatic Heat Up function for a
cooking zone:
1. Touch . The symbol comes on in the display.
2. Immediately touch
adjacent to the element you
want to control. The symbol
comes on in
the display.
3. Immediately touch
adjacent to the element you
want to control again and again until the necessary
heat setting comes on. After 3 seconds
comes on
in the display.
4. To stop the function touch
adjacent to the element
you want to control.
To start the Automatic Heat Up function for a
cooking zone: (For WHI645BC and WHI945BC
Models)
1. Touch P
( comes on in the display).
2. Immediately touch the necessary heat setting.
After 3 seconds comes on in the display. To stop the
function change the heat setting.
Power function
The Power function makes more power available to the
induction cooking zones. The Power function is activated
for 10 minutes at most. After, that the induction cooking
zone automatically sets back to highest heat setting. To
activate, touch (on WHI645BC and WHI945BC
modes is P) comes on. To deactivate, touch
(on WHI645BC and WHI945BC models is P) or
(on
WHI645BC and WHI945BC models touch any necessary
heat setting ) adjacent to the element you want to
control.
Power management
The power management divides the power between two
cooking zones in a pair (see the illustration). The power
function increases the power to the maximum level for
one cooking zone in the pair. It automatically decreases
the power in the second cooking zone to a lower level.
The display for the reduced zone change between
two levels.
Timer
Use the Count Down Timer to set how long the cooking
zone operates for only this one time. Set the Timer after
the selection of the cooking zone.
You can set the heat setting before or after you set
the timer.
•
To set the cooking zone: touch again and again
until the indicator of a necessary cooking zone comes on.
• To activate or change the Timer: touch or of the
timer to set the time ( 00 - 99 minutes). When the
indicator of the cooking zone starts to flash slow, the
time counts down.
• To deactivate the Timer: set the cooking zone with
and touch to deactivate the Timer. The
remaining time counts back to 00. The indicator of
the cooking zone goes out.
• To see the remaining time: set the cooking zone with
. The indicator of the cooking zone starts to
flash quickly. The display shows the remaining time.
When the time comes to an end, the sound operates
and 00 flashes. The cooking zone deactivates.
• To stop the sound: touch
. You can use the
Timer as a minute minder while the cooking zones
do not operate. Touch
. Touch or to set
the time. When the time comes to an end, the sound
operates and 00 flashes
• To stop the sound: touch
.
Pause (models with independent pause button)
The function sets all cooking zones that operate to
the lowest heat setting
.
When
operates, you cannot change the heat setting.
The
function does not stop the timer function.
• To activate this function touch
The symbol
comes on. For WHI645BC/WHI945BC models the
symbol come on.
• To deactivate this function touch
. The heat setting
that you set before comes on.
Flex Function (models WHI645BC & WHI945BC)
The Flex Function can be used with the griddle plate
accessory (sold separately).
The
function connects two cooking zones and they
operate as one.
First set the heat setting for one of the left hand cooking
zones. To start the Flex function touch
.
To set or change the heat setting touch one of the left
hand controls.
To stop the Flex function touch
. The cooking zones
will then operate independently
Lock (models with independent lock button)
When the cooking zones operate, you can lock the
control panel, but not
.
It prevents an accidental
change of the heat setting.
First set the heat setting. To start this function touch
.
The symbol comes on for 4 seconds. The Timer
stays on.
To stop this function touch
The heat setting that you
set before comes on. When you stop the appliance, you
also stop this function.
Loading ...
Loading ...
Loading ...