Loading ...
Loading ...
Loading ...
en Customer service
18
4Customer service
Cu s t o mer servi ce
Our after-sales service is there for you if your appliance
needs to be repaired. We will always find an
appropriate solution, also in order to avoid after-sales
personnel having to make unnecessary visits.
E number and FD number
When calling us, please quote the full product number
(E no.) and the production number (FD no.) so that we
can provide you with the correct advice. The rating plate
bearing these numbers can be found when you open
the appliance door.
If your appliance operates with steam, you will find the
rating plate on the right-hand side behind the panel.
To save time, you can make a note of the numbers for
your appliance and the telephone number of the after-
sales service in the space below in case you need
them.
Please note that a visit from an after-sales service
engineer is not free of charge in the event that the
appliance has been misused, even during the warranty
period.
Please find the contact data of all countries in the
enclosed customer service list.
To book an engineer visit and product advice
Rely on the professionalism of the manufacturer. You
can therefore be sure that the repair is carried out by
trained service technicians who carry original spare
parts for your appliances.
This appliance corresponds to the standards EN 55011
and CISPR 11. It is a Group 2, Class B product.
Group 2 means that microwaves are produced for the
purpose of heating food. Class B states that the
appliance is suitable for private households.
Technical specifications
E no.
FD no.
After-sales service O
GB 0344 892 8989
Calls charged at local or mobile rate.
IE 01450 2655
0.03 € per minute at peak. Off peak 0.0088 €
per minute.
Z-Nr:FD:E-Nr:
Type:
Power supply 220-240 V, 50/60 Hz
Max. total connected load 1220 W
Microwave output 900 W (IEC 60705)
Microwave frequency 2450 MHz
Fuse 10 A
Dimensions (H/W/D)
- Appliance 382 x 594 x 320 mm
- Cooking compartment 220 x 350 x 270 mm
VDE approved Yes
CE mark Yes
Loading ...
Loading ...
Loading ...