Loading ...
Loading ...
Loading ...
NOTE:
•
If the radio has a USB port, connecting an iPodt to this
port does not play the media. For playing an iPodt,
use the separate 16–pin connector port (in the glove
compartment on some vehicles).
•
Connecting an iPodt to the AUX port located in the
radio faceplate, plays media, but does not use the UCI
feature to control the connected device.
Connecting The iPodT
Use the optional connection cable to connect an iPodt to
the vehicle’s 16–pin connector port (which is located in
the glove compartment on some vehicles). Once the
iPodt is connected and synchronized to the vehicle’s UCI
system (iPodt may take a few seconds to connect), the
iPodt starts charging and is ready for use by pressing
radio switches, as described below.
NOTE:
•
You may have to remove the connector pin protection
cap from the 16–pin connector port, prior to connect-
ing the cable.
•
If the iPodt battery is completely discharged, it may
not communicate with the UCI system until a mini-
mum charge is attained. Leaving the iPodt connected
to the UCI system may charge it to the required level.
Using This Feature
By using the optional connection cable to connect an
iPodt to the vehicle’s UCI 16–pin connector port:
•
The iPodt audio can be played on the vehicle’s sound
system, providing metadata (Artist, track title, album,
etc.) information on the radio display.
•
The iPodt can be controlled using the radio buttons to
Play, Browse, and List the iPodt contents.
•
The iPodt battery charges when plugged into the UCI
connector.
242 UNDERSTANDING YOUR INSTRUMENT PANEL
Loading ...
Loading ...
Loading ...