Loading ...
Loading ...
Loading ...
Note: Make sure that the wiper arm does
not spring back against the glass when the
wiper blade is not attached.
3. To install, reverse the removal
procedure.
Note: Make sure that the wiper blade locks
into place.
CHANGING A BULB
WARNING: Switch the lamps and
the ignition off. Failure to do so could
result in serious personal injury.
WARNING: Bulbs can become hot.
Let the bulb cool down before removing
it. Failure to do so could result in
personal injury.
Use the correct specification bulb. See
Bulb Specification Chart (page 424).
Install in the reverse order unless otherwise
stated.
Rear Direction Indicator and
Reversing Lamp
E292168
1. Switch all of the lamps and the ignition
off.
2. Use a suitable tool, for example a
screwdriver, to carefully remove the
access cover.
3. Remove the side cover.
4. Remove the screw that secures the
lamp assembly.
5. Gently pull the lamp assembly away
from the vehicle.
6. Turn the bulb holder counterclockwise
and remove it.
7. Remove the bulb by pulling it straight
out.
E292171
Rear direction indicator.A
Reverse lamp.B
LED Lamps
LED lamps are not serviceable items. See
an authorized dealer if they fail.
The following lamps are LED:
• Headlamp low beam.
• Headlamp high beam.
• Front direction indicator.
• Side direction indicator.
• Daytime running lamps.
• Front fog lamps (if equipped).
• Brake and rear lamp.
• Rear side marker lamp.
343
Explorer (CTW) Canada/United States of America, enUSA, Edition date: 201902, Third-Printing-
Maintenance
Loading ...
Loading ...
Loading ...