Loading ...
Loading ...
Loading ...
9
OPERATING INSTRUCTIONS
NOTE
To change the temperature or soil level once the cycle has
begun, press the PAUSE button, make the new selection
and press START again.
NOTE
To change options once the cycle has begun, press the
PAUSE button, make the new selection and press START
again.
Cycle Settings
Select appropriate wash water temperature and soil level
settings suitable for each load. Make selections according to
fi ber content, colorfastness and soil level.
The settings can be changed before the cycle is started. If
changes are attempted after the cycle starts, the lights will
fl ash and a signal will beep, but the cycle will continue.
Wash Water Temperature
To change the preset washing temperature, press the Temp
button to scroll to the desired setting.
The water heater setting and its distance from the washer,
water usage in other parts of the home, and seasonally low
ground water temperature in some geographic areas can
affect water temperature.
Hot
Use this setting for heavily soiled white or colorfast cottons
and blends.
Warm
Use this setting for normally soiled white or colorfast
cottons or blends.
Eco Warm
Use this setting for normally soiled sheets, casual items and
washable woolens.
Cold
Some warm water will automatically blend with cold tap
supply to achieve cold. Use this setting for lightly soiled non-
colorfast items, knits, delicates, and hand washables.
Tap Cold
Wash and rinse temperatures are equivalent to temperature
of cold tap supply. Use this selection for fabrics and colors
that are prone to dye transfer. For use with cold water
detergents.
To select an option, press the corresponding option button to
illuminate the desired option. To deselect an option, press the
option button again and the indicator light will turn off.
To protect your fabrics, not all options are available with every
cycle. If an option is not appropriate for the cycle, the indicator
will not light.
Cycle Options
Soil Level
To change the preset level, press the Soil Level button to
scroll to the length of agitation desired.
Adjust duration of agitation time based on the soil level of
each load. Extra Heavy, Heavy, Medium, Light, and
Extra Light soil levels are available.
Soak
Add a soak phase to the wash cycle to help release deep
stains.
Extra Rinse
Use this option when additional rinsing is desired to remove
excess dirt and detergent. It is recommended for heavily
soiled loads or if household members have sensitive skin.
Chime
A signal will sound at the end of the cycle if this option is
selected.
Fabric Softener
You must activate the fabric softener option for correct
operation of the fabric softener dispenser. See Care and
Cleaning for dispenser cleaning procedures.
Max Fill (certain cycles only)
Select the Max Fill feature for loads which need extra water.
Pressing the Max Fill button adds the maximum amount of
fi ll possible, and will increase cycle duration time. The Max
Fill feature is not recommended for typical use and is only for
special instances.
Loading ...
Loading ...
Loading ...