Loading ...
Loading ...
Loading ...
18
AVOID SERVICE CHECKLIST
ERROR CODE POSSIBLE CAUSE SOLUTIONS
Water fi ll time takes too long (1 hour) • Close washer lid.
• Fully open hot and cold faucets.
• Straighten inlet hoses if kinked.
• Check water supply pressure at other outlets in the house.
• Disconnect inlet hoses and clean inlet screens.
• Check for water leakage from the tub.
• If situation continues, call service - 1 800 944 9044.
Washer takes too long to drain (10 minutes) • Check the fuse or circuit breaker.
• Check height of stand pipe.
• Close lid. Washer will not drain or spin with open lid.
• Straighten kinked drain hose.
• Unclog clogged drain hose.
• If situation continues, call service - 1 800 944 9044.
Washer lid open • Close the lid.
• The lid lock or PCB has failed.
• If situation continues, call service - 1 800 944 9044.
Washer is out-of-balance • Washer is not resting fi rmly on fl oor. Move washer so it
rests fi rmly on fl oor. Adjust leveling legs. See INSTALLA-
TION INSTRUCTIONS for details.
• Foam shipping support has not been removed during in-
stallation. See INSTALLATION INSTRUCTIONS for remov-
ing foam shipping support.
• Wash load unevenly distributed in tub. Stop washer and
rearrange wash load.
• If situation continues, call service - 1 800 944 9044.
PCB failed • Call service - 1 800 944 9044.
Load sensing failed • Call service - 1 800 944 9044.
Water level sensor failed • Call service - 1 800 944 9044.
Lid lock failed • Call service - 1 800 944 9044.
PCB failed • Call service - 1 800 944 9044.
Lid open for more than 20 seconds with
Control Lock function activated
• Power off the unit.
• Deactivate the Control Lock feature.
• If situation continues, call service - 1 800 944 9044.
Error Codes
Loading ...
Loading ...