Loading ...
Loading ...
Loading ...
The dishes were not
loaded correctly.
See notes in " Loading the Dishwasher Baskets ".
Select a more intensive programme.
See" Wash Cycle Table ."
Use more detergent, or change your detergent.
Rearrange the items so that the sp ay can rotate freely.r
Clean and/or fit the filter combination correctly.
Clean the sp ay arm jets. See "Cleaning the Spray
Arms".
r
Use les s detergent if you have soft water and select
a shortest cycle to wash the glassware and to get
them clean.
Use a mild abrasive cleaner to eliminate those marks.
Re-loading the dishes properl y.
Load the dishwasher as suggest ed in the directions.
Increase the amount of rinse-aid/ refill the rinse-aid
dispenser.
Do not empty your dishwasher immediately after
washing. Open the door sl ightly so that the steam can
escape. Begin unloadi ng the dishwasher only once t
he dishes are barely warm to the touc h. Empty the low
basket first. This prevents water form dropping off
dishes in the upper basket.
In short program the washing temperature is lower.
This also lowers cleaning performance. Choose
a program with a long washing time.
Water drainage is m ore difficult wi th these items.
Cutlery or dishes of this type are not suitable for
washing in the dishwasher.
The programme was
notpowerful enough.
Not enough detergen t
was dispensed.
Items are blocking
the path of sp ay arms.r
The filter combination
inthebaseofwash
cabinet is not clean or
is not correc t ly fitted.
This may cause
the sp a y arm jet s
to get blocked.
r
Combination of soft
water and too much
detergent.
Aluminum utensils
have rubbed against
dishes.
Dishes block
detergent cups.
Improper loading
Too little rinse-aid
Dishes are remo ved
too soon
Wrong program
has been selected
Use of cutlery with
a low-quality coa ting
17
Uns a ti s
-factory
was hin g
res u lt
Uns a ti s
-factory
dry i ng
res u lt
If overflow occu rs, tur n off the main water supply b ef ore calling a service.
If there is water in the base pan because of an overfill or small leak,
the water should be removed before resta rti ng the dishwasher .
When s ome malfunctions come on, the appliance will display error codes to warn you:
Longer inlet t ime.
Faucets is not opened, or wa ter intake is restricted,or water pressure
is too low.
Malfunction of temperature sensor or of heating element.
Too much inlet water. .
Short circuit or break of temperature sensor
Opencircuit or break of temperature sensor
Longer heating time,
but not reaching required temperature
Overfilled.
Failure of temperature sensor
Failure of temperature sensor
Loading ...
Loading ...
Loading ...