Loading ...
Loading ...
Loading ...
Cool{top installation
1. Visually inspect the cooktop for damage. Also make
sure all cooktop screws are tight (see Figure 5).
2. Install the retainer brackets. See Figure 6.
Hole located
under the burner
box to fix the
retainer bracket.
Position brackets
on unit cutout
center line as
shown.
Figure 7
4. Fix the cool<top to the bracket using the screws
supplied (see Figure 7).
The retainer brackets MUST be installed, to meet local
codes or, in their absence, with the Natlonal Electrical
Code ANSI/NFPA No. 70mlatest edition (see Figure
6).
Granite countertop installation
Granite Countertop Installation kit Div 22, Src 628, p/n
903061-9010 can be ordered through a Service Center,
by phone at |=800=4=MY=HOME ® or through our web site
at www.parisdlrect.com.
Cooktop Countertop
Spring
spacer
Retainer bracket
Figure 6
Checking Operation
Refer to the Use and Care Guide for operation.
_Do not touch cooktop glass or
elements. They may be hot enough to burn you.
Before You Call for Service
Read the Before You Caii for Service Checklist and
operating instructions in your Use and Care Guide.
It may save you time and expense. The list includes
common occurrences that are not the result of defective
workmanship or materials in this appliance.
Refer to your Use and Care Guide for Sears service
phone numbers, or call |mSOO-4-MYmHOMIF ®.
3. Set the cooktop into the countertop cutout.
NOTE: Do not use caulking compound; cool<top should
be removable for service when needed.
6
Loading ...
Loading ...
Loading ...