Loading ...
Loading ...
3
Cooling On/Off
Your refrigerator and freezer will not cool when cooling is turned off.
■ To turn cooling off, press and hold the SMART GRID and FILTER
buttons at the same time for 3 seconds.
IMPORTANT: To avoid unintentionally locking the dispenser or
changing other settings, be sure to press both buttons at exactly the
same time.
When cooling is off, “COOLING OFF” will appear on the display
screen.
■ Press and hold SMART GRID and FILTER for 3 seconds again to
turn cooling back on.
Smart Grid
See the “Smart Refrigerator” instruction sheet for information about
setting up Smart Grid functionality, turning it on and off, receiving
important notifications, and taking advantage of available features.
Delay Ice
For information about the Delay Ice feature that is
associated with Smart Grid functionality, see the
“Smart Refrigerator” instruction sheet.
Additional Features
Fast Ice
The Fast Ice feature assists with temporary periods of heavy ice use by
increasing ice production over a 24-hour period.
IMPORTANT: This feature only works if the ice maker is turned on. See
“Ice Maker and Storage Bin.”
■ Press FAST ICE to turn on the Fast Ice feature. When
the feature is on, the Fast Ice icon will appear on the
dispenser display screen. The Fast Ice setting will
remain on for 24 hours unless manually turned off.
■ To manually turn off the Fast Ice feature, press FAST ICE again or
adjust the freezer temperature set point. The Fast Ice icon will
disappear when the feature is off.
NOTE: If increased ice production is desired at all times, change the
freezer set point to a lower setting. Setting the freezer to a colder
temperature may make some foods, such as ice cream, harder.
Door Ajar Alarm
The Door Ajar Alarm feature sounds an alarm when the refrigerator or
freezer door is open for 5 minutes and the product cooling is turned on.
The alarm will repeat every 2 minutes. Close both doors to turn it off.
The feature then resets and will reactivate when either door is left open
again for 5 minutes.
NOTE: To mute the audible alarm while keeping the doors open,
such as while cleaning the inside of the refrigerator, press any
button on the control panel. The alarm sound will be temporarily
turned off, but the Door Ajar icon will still be displayed on the dispenser
control panel.
Convertible Drawer Temperature Control
(on some models)
The control can be adjusted to properly chill meats or vegetables. The
air inside the pan is cooled to avoid “spot” freezing and can be set to
keep meats at the National Livestock and Meat Board recommended
storage temperatures of 28° to 32°F (-2° to 0°C).
To store meat:
Set the control to one of the three MEAT settings to store meat at its
optimal storage temperature.
To store vegetables:
Set the control to VEG to store vegetables at their optimal storage
temperatures.
NOTE: If food starts to freeze, move the control to the right (less cold),
toward the VEG setting. Remember to wait 24 hours between
adjustments.
Crisper Humidity Control (on some models)
You can control the amount of humidity in the moisture-sealed crisper.
Adjust the control to any setting between LOW and HIGH.
LOW (open) for best storage of fruits and vegetables with skins.
HIGH (closed) for best storage of fresh, leafy vegetables.
Chilled Door Bin (on some models)
Cool air from the freezer is directed to the refrigerator door bin directly
beneath the vents.
NOTE: The dairy compartment and can rack are not associated with
the Chilled Door Bin feature.
Chilled Door Bin Control
The chilled door bin control is located
on the left-hand side of the refrigerator
compartment.
■ Slide the door chill control to the
left to reduce the flow of cold air to
the bin and make it less cold.
■ Slide the door chill control to the
right to increase the flow of cold
air to the bin and make it colder.
Water and Ice Dispensers
NOTES:
■ The dispensing system will not operate when either door
(refrigerator or freezer) is open.
■ Allow 24 hours for the refrigerator to cool down and chill water.
■ Allow 24 hours to produce the first batch of ice. Discard the first
three batches of ice produced. Wait 72 hours for full ice production.
■ The display screen on the dispenser control panel will turn off
automatically and enter “sleep” mode when the control buttons and
dispenser pads have not been used for 2 minutes or more. While in
“sleep” mode, the first press of a control button will only reactivate
the display screen, without changing any settings.
Flush the Water System
Air in the water dispensing system can cause the water dispenser to
drip. After connecting the refrigerator to a water source or replacing the
water filter, flush the water system. Flushing the water dispensing
system forces air from the water line and filter, and prepares the water
filter for use.
NOTE: As air is cleared from the system, water may spurt out of the
dispenser.
A
A. Chilled door bin control
ICE AND WATER
Loading ...
Loading ...
Loading ...