Loading ...
Loading ...
Loading ...
Use
16
segments (each flashing segment means
12 minutes of cooking time left).
5. At the end of cooking, the timer will
switch the oven heating elements off, the
buzzer will start to sound and the
numbers on the dial will flash.
6. The set program can be cancelled: press
key for 2 seconds to cancel the set
time and switch the oven off manually if a
cooking operation is in progress.
Programmed cooking
1. Set the cooking time as described in the
previous point “Timed cooking”.
2. Within 5 seconds of last pressing key
or , press key again to set the
cooking end time. Symbol will flash
on the display together with the current
time, with the internal segments
illuminated to show the end of cooking
time.
3. Press key or to set the cooking
end time.
4. 5 seconds after the last key is pressed,
the display will show the current time and
the cooking start and end times,
represented by the illuminated internal
segments. As soon as the current time
reaches the set cooking start time, the
internal segments will flash and the oven
starts cooking.
5. At the end of cooking, the timer switches
the oven heating elements off, the buzzer
starts to sound and the numbers on the
dial flash.
6. The set program can be cancelled: press
key for 2 seconds to cancel the set
time and switch the oven off manually if a
cooking operation is in progress.
• In the example below, the current time is
7.06 and cooking is programmed to
start at 8.00 and end at 9.00.
• At 8 o'clock the internal segments
between 8 and 9 will start to flash.
Display reduced brightness
To reduce energy consumption in stand-by,
briefly press key
to reduce the display
brightness. To restore the normal brightness,
press again.
It is not possible to set a cooking
time of more than 12 hours.
Programmed cooking is the
function which allows a cooking
operation to be started at a set
time and then ended after a
specific length of time set by the
user.
For the oven to start cooking after
the programming procedures just
described, the knobs must be
correctly set on the required
temperature and function.
Loading ...
Loading ...
Loading ...